基于降噪时序深度学习网络的风电功率短期预测方法

利用风电场历史功率数据预测未来一段时间内的风功率,对保障电网安全稳定运行具有重要的意义。本文提出一种基于奇异谱分析SSA(singular spectrum analysis)和长短时记忆LSTM(long-short term memory net⁃work)网络的时序特征预测框架用于短期风功率的预测。首先通过SSA对历史风功率原始数据进行降噪处理,然后经过数据转换之后,以LSTM网络为基础进行预测模型的训练,最后通过某风电场提供的两个风机的历史功率数据进行验证。实验结果表明,奇异谱分析对风电场的历史数据具有良好的降噪性,SSA+LSTM模型在测试数据上取得了较好的预测性能,能够有效进行短期风功率的预测。     

计及风险规避的电力零售商平衡市场交易模型

由于新能源出力以及终端负荷需求的不确定性,电力零售商在日前市场的竞标电量与实时市场的购买电量之间存在不平衡而产生惩罚成本风险。引入用户侧可控负荷作为平衡资源参与市场交易,提出了一种风险规避程度指标,以此来度量交易前后电量偏差程度,以信息熵度量残差序列离散程度计算风险规避程度指标。以电力零售商运行收益、用户需求响应满意度以及风险规避程度最大为目标建立多目标风险规避模型,采用自适应权重粒子群算法进行模型求解。通过算例表明,所提出的模型从电网-电力零售商-用户多个角度去考虑电力零售商参与平衡市场交易策略,能够有效提高电力零售商的运行效益以及用户满意度,同时可以提高电力市场管理的可靠性与安全性。     

Novel CPG algorithm for tracking fast sudden changes based on tangent rule

ABSTRACT

This paper proposes a novel tracking method to deal with fast changes of solar irradiation and power limit change in order to increase tracking efficiency. This goal is achieved by estimating (i) next operating mode and (ii) next step point with the use of tangent rule in triangle. After every fast response to sudden changes, accurate response phase starts in order to track desired power in each operating mode by adaptive step size. Drift problem in defining next operating mode is eliminated in proposed method by estimating next operating mode, and settling time is decreased to about 25 percent of settling time of other methods by estimating next step point. Simulation and experimental results show the performance of proposed method.     

Computer‐aided design methodology for linearity enhancement of multiwatt GaN HEMT amplifiers using multiple parallel devices

This article presents a design methodology for linearizing GaN HEMT amplifiers based on splitting a large FET into multiple parallel FETs with same total gate periphery and by biasing them individually. By varying the biases, the magnitude and the phase of the IMD3 components at the output of FET changes. A detailed simulation methodology using commercial microwave CAD software is presented. Simulation results show that by biasing one device in Class AB and other(s) in deep Class AB mode, IMD3 components of parallel FETs can be made out of phase to each other leading to cancellation and improvement in linearity. Three prototype circuits were simulated using (a) a single 5 mm FET (1 × 5 mm), (b) two parallel 2.5 mm FETs (2 × 2.5 mm), and (c) four parallel 1.25 mm FETs (4 × 1.25 mm), for a total gate periphery of 5 mm, over the frequency range of 0.8 to 1.0 GHz. IMD3 improvement up to 20 dBc was achieved with the 4 × 1.25 mm circuit when the FET biases were optimized. Measurement results show improvement in linearity up to 20 dBc for 4 × 1.25 mm circuit. The proposed method improves linearity without a substantial penalty on the power consumption and is straightforward to implement.     

因素空间理论下基点分类算法研究

目前，基于因素空间理论的背景基提取算法计算过程复杂，初始化必须依赖各因素极值，基点数量提取冗余等原因，未能在应用中取得很好效果。为此，结合内点判别法和知识可继承、可扩展的思想，提出一种计算简单、初始化独立、基点数量小的改进的背景基提取算法。然后，利用改进的背景基提取算法构造出一种全新的数据分类算法-基点分类算法，基点分类算法以提取每一类样本的背景基为预测模型，再通过新定义的λ-背景基，优化预测模型。数值实验表明:基点分类算法原理简单、构造难度小、分类模型泛化能力强，预测能力准确率高，同时严格的模型限定区域又能为识别新类别提供新方法。     

基于关键拓扑变动项辨识的调度操作潮流校核方法

为解决传统调度操作潮流校核中的有效性问题，定义了一种面向调度操作的关键拓扑变动概念，提出并实现了基于关键拓扑变动辨识的调度操作潮流校核方法。首先，剖析了调度操作安全校核的实施目的，围绕其运行断面潮流校验的校核目的，定义了面向调度操作的关键拓扑变动概念，并基于网络拓扑连接关系设计了其辨识方法。在此基础上，提出了基于关键拓扑变动项辨识的调度操作潮流校核方法，明确了其实施流程和要点。最后基于当前电网调度自动化系统实际，构建了其实施框架，并介绍了其在某电网的实施效益。     

采煤工作面煤层注水参数试验研究

通过在6198采煤工作面现场施工煤层注水钻孔采取煤样,实验室试验注水钻孔水压力分布、煤样含水率变化,得到了工作面煤层注水影响半径等技术参数,为采煤工作面煤层注水提供了一定的参考依据。     

计及RSC控制的DFIG短路电流直流分量解析表达

现有文献针对计及转子变流器(RSC)控制的双馈感应风电机组(DFIG)定子短路电流解析表达,将定子磁链当作一阶直流衰减分量或忽略功率外环控制。基于DFIG电压、磁链和RSC控制方程,得到定子电流关于定子电压和定子功率的传递函数,提出定子电流的精确解析表达式。基于RSC内、外环PI参数关系,推导直流分量衰减时间常数和角频率关于PI参数的表达式。分析了RSC内外环PI参数对定子电流直流衰减分量的影响。仿真结果验证了解析表达式的准确性,为PI参数选取和保护装置测量、整定提供依据。     

动态结冰孔隙结构三维建模方法

动态结冰内部呈现多孔结构特点，这一微观孔隙结构是影响其宏观物性的关键因素，然而传统方法难以对三维孔隙结构进行定量表征。为了客观刻画结冰微观结构特征，提出了基于结冰二维图像定量信息的三维微观结构建模方法。首先，研究并确定了真实结冰尺寸与建模区域之间的比例关系，分析比例尺对分辨率和建模的影响；其次，结合二维孔隙率和孔径分布函数，提出了三维孔隙数量及其孔径的推导方法，并给定了孔隙位置随机生成方法；基于此，最终建立了以0-1矩阵形式表征结冰三维微观孔隙结构的方法。实验表明，所生成三维结冰模型的二维孔隙定量信息与实验结果吻合度较高，建模方法准确可行，为动态结冰三维刻画、微观特征参数提取和相关微观仿真模拟提供了新途径。     

Three-phase four-wire shunt active power filter based on the SOGI filter and Lyapunov function for DC bus control

The three-phase four-wire shunt active power filter (SAPF) was developed to suppress the harmonic currents generated by nonlinear loads, and for the compensation of unbalanced nonlinear load currents, reactive power, and the harmonic neutral current. In this work, we consider instantaneous reactive power theory (PQ theory) for reference current identification based on the following two algorithms: the classic low-pass filter (LPF) and the second-order generalized integrator (SOGI) filter. Furthermore, since an important process in SAPF control is the regulation of the DC bus voltage at the capacitor, a new controller based on the Lyapunov function is also proposed. A complete simulation of the resultant active filtering system confirms its validity, which uses the SOGI filter to extract the reference currents from the distorted line currents, compared with the traditional PQ theory based on LPF. In addition, the simulation performed also demonstrates the superiority of the proposed approach, for DC bus voltage control based on the Lyapunov function, compared with the traditional proportional-integral (PI) controller. Both novel approaches contribute towards an improvement in the overall performance of the system, which consists of a small rise and settling time, a very low or nonexistent overshoot, and the minimization of the total harmonic distortion (THD).